/* * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. */ /*------------------ Reference System Memories ------------- +===================+============+=======+============+============+ | Memory | Address | Size | CPU Access | NPU Access | +===================+============+=======+============+============+ | ITCM | 0x00000000 | 512KB | Yes (RO) | No | +-------------------+------------+-------+------------+------------+ | DTCM | 0x20000000 | 512KB | Yes (R/W) | No | +-------------------+------------+-------+------------+------------+ | SSE-300 SRAM | 0x21000000 | 2MB | Yes (R/W) | Yes (R/W) | +-------------------+------------+-------+------------+------------+ | Data SRAM | 0x01000000 | 2MB | Yes (R/W) | Yes (R/W) | +-------------------+------------+-------+------------+------------+ | DDR | 0x60000000 | 32MB | Yes (R/W) | Yes (R/W) | +-------------------+------------+-------+------------+------------+ */ /*---------------------- ITCM Configuration ---------------------------------- Flash Configuration Flash Base Address <0x0-0xFFFFFFFF:8> Flash Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __ROM_BASE = 0x00000000; __ROM_SIZE = 0x00080000; /*--------------------- DTCM RAM Configuration ---------------------------- RAM Configuration RAM Base Address <0x0-0xFFFFFFFF:8> RAM Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __RAM_BASE = 0x20000000; __RAM_SIZE = 0x00080000; /*----------------------- Data SRAM Configuration ------------------------------ Data SRAM Configuration DATA_SRAM Base Address <0x0-0xFFFFFFFF:8> DATA_SRAM Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __DATA_SRAM_BASE = 0x01000000; __DATA_SRAM_SIZE = 0x00200000; /*--------------------- Embedded SRAM Configuration ---------------------------- SRAM Configuration SRAM Base Address <0x0-0xFFFFFFFF:8> SRAM Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __SRAM_BASE = 0x21000000; __SRAM_SIZE = 0x00200000; /*--------------------- Stack / Heap Configuration ---------------------------- Stack / Heap Configuration Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __STACK_SIZE = 0x00008000; __HEAP_SIZE = 0x00008000; /*--------------------- Embedded RAM Configuration ---------------------------- DDR Configuration DDR Base Address <0x0-0xFFFFFFFF:8> DDR Size (in Bytes) <0x0-0xFFFFFFFF:8> -----------------------------------------------------------------------------*/ __DDR_BASE = 0x60000000; __DDR_SIZE = 0x02000000; /* *-------------------- <<< end of configuration section >>> ------------------- */ MEMORY { ITCM (rx) : ORIGIN = __ROM_BASE, LENGTH = __ROM_SIZE DTCM (rwx) : ORIGIN = __RAM_BASE, LENGTH = __RAM_SIZE DATA_SRAM (rwx) : ORIGIN = __DATA_SRAM_BASE, LENGTH = __DATA_SRAM_SIZE SRAM (rwx) : ORIGIN = __SRAM_BASE, LENGTH = __SRAM_SIZE DDR (rwx) : ORIGIN = __DDR_BASE, LENGTH = __DDR_SIZE } /* Linker script to place sections and symbol values. Should be used together * with other linker script that defines memory regions ITCM and RAM. * It references following symbols, which must be defined in code: * Reset_Handler : Entry of reset handler * * It defines following symbols, which code can use without definition: * __exidx_start * __exidx_end * __copy_table_start__ * __copy_table_end__ * __zero_table_start__ * __zero_table_end__ * __etext * __data_start__ * __preinit_array_start * __preinit_array_end * __init_array_start * __init_array_end * __fini_array_start * __fini_array_end * __data_end__ * __bss_start__ * __bss_end__ * __end__ * end * __HeapLimit * __StackLimit * __StackTop * __stack */ ENTRY(Reset_Handler) SECTIONS { /* .ddr is placed before .text so that .rodata.tvm is encountered before .rodata* */ .ddr : { . = ALIGN (16); *(.rodata.tvm) . = ALIGN (16); *(.data.tvm); . = ALIGN(16); } > DDR .text : { KEEP(*(.vectors)) *(.text*) KEEP(*(.init)) KEEP(*(.fini)) /* .ctors */ *crtbegin.o(.ctors) *crtbegin?.o(.ctors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) *(SORT(.ctors.*)) *(.ctors) /* .dtors */ *crtbegin.o(.dtors) *crtbegin?.o(.dtors) *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) *(.rodata*) KEEP(*(.eh_frame*)) } > ITCM .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > ITCM __exidx_start = .; .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > ITCM __exidx_end = .; .copy.table : { . = ALIGN(4); __copy_table_start__ = .; LONG (__etext) LONG (__data_start__) LONG (__data_end__ - __data_start__) /* Add each additional data section here */ __copy_table_end__ = .; } > ITCM .zero.table : { . = ALIGN(4); __zero_table_start__ = .; __zero_table_end__ = .; } > ITCM /** * Location counter can end up 2byte aligned with narrow Thumb code but * __etext is assumed by startup code to be the LMA of a section in DTCM * which must be 4byte aligned */ __etext = ALIGN (4); .sram : { . = ALIGN(16); } > SRAM AT > SRAM .data : AT (__etext) { __data_start__ = .; *(vtable) *(.data) *(.data.*) . = ALIGN(4); /* preinit data */ PROVIDE_HIDDEN (__preinit_array_start = .); KEEP(*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); /* init data */ PROVIDE_HIDDEN (__init_array_start = .); KEEP(*(SORT(.init_array.*))) KEEP(*(.init_array)) PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); /* finit data */ PROVIDE_HIDDEN (__fini_array_start = .); KEEP(*(SORT(.fini_array.*))) KEEP(*(.fini_array)) PROVIDE_HIDDEN (__fini_array_end = .); KEEP(*(.jcr*)) . = ALIGN(4); /* All data end */ __data_end__ = .; } > DTCM .bss.noinit (NOLOAD): { . = ALIGN(16); *(.bss.noinit.*) . = ALIGN(16); } > SRAM AT > SRAM .bss : { . = ALIGN(4); __bss_start__ = .; *(.bss) *(.bss.*) *(COMMON) . = ALIGN(4); __bss_end__ = .; } > DTCM AT > DTCM .data_sram : { . = ALIGN(16); } > DATA_SRAM .heap (COPY) : { . = ALIGN(8); __end__ = .; PROVIDE(end = .); . = . + __HEAP_SIZE; . = ALIGN(8); __HeapLimit = .; } > DTCM .stack (ORIGIN(DTCM) + LENGTH(DTCM) - __STACK_SIZE) (COPY) : { . = ALIGN(8); __StackLimit = .; . = . + __STACK_SIZE; . = ALIGN(8); __StackTop = .; } > DTCM PROVIDE(__stack = __StackTop); /* Check if data + stack exceeds DTCM limit */ ASSERT(__StackLimit >= __bss_end__, "region DTCM overflowed with stack") }